Ang tanan nga mga Categories

Denitrasyon nga Tambutso Gas Pagpainit sa Hot Air Furnace

Panimalay>Products>Hot Air Hurno>Denitrasyon nga Tambutso Gas Pagpainit sa Hot Air Furnace

Denitration flue gas pagpainit init nga hangin hudno

Quick detalye

The flue gas removal of NOX usually needs to raise the temperature to about 280 ℃, and then react with the catalyst. The role of the hot air furnace is to send the high-temperature flue gas after fuel combustion to the main flue gas pipe to raise the temperature of the flue gas.

Our hot blast stove has the following advantages:
1. 99%。Non standard customization is more energy-saving. Different refractories are selected according to the design power and furnace structure under different working conditions. The furnace body has a long life, and the fuel burnout rate exceeds 99%.
2. Wide range of fuels. Blast furnace gas, coke oven gas, mixed gas, industrial waste gas, natural gas, etc. can be selected as hot blast stove fuel.
3. Safe operation. The alarm and gas cut-off protection under various conditions are designed to avoid safety accidents.
4. Automatic operation. PLC control, and can communicate with DCS. One key start and automatic adjustment.

The following are the design parameters of a sintering flue gas denitration heating hot blast furnace in an iron and steel plant.


paghingalan, pagtinagsa
Pagproseso sa gasSintering flue gas
Flue gas volume310000Nm³/h
Inisyal nga temperatura230 ℃
Temperature after heating280 ℃
Flue gas temperature provided by hot air furnace850 ℃
Hot blast furnace power800×104Kcal/h
Tipo sa gasBlast furnace gas (lower calorific value: 760Kcal/Nm3)
Pag-konsumo sa gas10600Nm³/h
Gahum konsumo35kw
Ang mode sa controlPLC fully automatic control
Pagbiya sa Mensahe