Common Faults and Solutions of Gas Boiler burners (II)

February 11,2023

No ignition, air pressure is normal, electricity has no ignition-- Gas Boiler burners

Fault phenomenon	No ignition, air pressure is normal, electricity has no ignition	Tangshan Jinsha Combustion Heat Energy Co.,Ltd
Item	Cause of failure	Exclusion measure
1	The ignition transformer is burnt out	renew
2	The cable is damaged or off	Reinstall or replace
3	Too large or too small clearance, relative size of ignition rod position	readjustment
4	The electrode is broken or short-circuited to the ground	Reinstall or replace
5	Improper spacing	readjustment

Fault phenomenon	Fire for 5 seconds and then turn off the fire	Tangshan Jinsha Combustion Heat Energy Co.,Ltd
Item	Cause of failure	Exclusion measure
1	The pressure is insufficient, the pressure drop is too large, and the gas supply flow is small	Adjust the air pressure and clean the screen
2	The air volume is too small, the combustion is not sufficient, and the smoke is thick	Readjustment
3	Too much air, white gas	Readjustment