All Categories

+86 18731531256

[email protected]

Blog

Home > Blog > Common Faults and Solutions of Gas Boiler burners (I)

Common Faults and Solutions of Gas Boiler burners (I)

February 11,2023

Press the start button after power on, the motor will not turn

Fault phenomenonPress the start button after power on, the motor will not turnTangshan Jinsha Combustion Heat Energy Co.,Ltd
ItemCause of failureExclusion measure
1Underpressure lockingAdjust the pressure regulation
2Solenoid valve is lax, air leakage at the joint, check and lockClean or repair the solenoid valve connection
3Thermal relay open circuitCheck the element for damage and electrical current
4At least one of the conditional loops is not trueCheck for water levels, pressure, temperature

After starting, the front purge is normal, but does not ignite

Fault phenomenonAfter starting, the front purge is normal, but does not igniteTangshan Jinsha Combustion Heat Energy Co.,Ltd
ItemCause of failureExclusion measure
1Insufficient electric fire gasCheck the wiring and repair it
2Solenoid valve does not work (main valve, ignition valve)renew
3The solenoid valve is burnt outAdjust the air pressure rating
4Barometric instabilityReduce the distribution of wind,
5There is too much windReduce throttle opening


1

2

3

Hot categories